The Schneider Electric Conext MPPT 60 150 is a photovoltaic (PV) charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the MPPT 60 150 regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.

Why Choose Schneider Electric Conext MPPT 60 150 Charge Controller

Higher return on investment

• Maximum Power Point Tracking (MPPT) algorithm continually seeks the maximum power available from the PV array
• Improve battery life with selectable multi-stage temperature compensated charging

Flexible

• Stand-alone application or full integration with Conext XW Pro, XW+ and Conext SW inverter charger system
• Compatible with any brand of PV Module
• Remote monitoring available

Easy to install

• Configurable auxiliary output
• LCD screen with face plate buttons for configuration and system monitoring
• Integrated PV ground fault protection for negative grounded arrays

Conext MPPT 60 150 Charge Controller Specifications

Electrical specifications

• Nominal battery voltage: 12, 24, 36, 48, 60 V
• Battery voltage operating range: 0 Vdc to 80 Vdc
• Min. PV operating voltage Battery voltage: +5 V
• Max PV operating voltage: 140 V
• Max. PV array open circuit voltage: 150 V including temperature correction factor
• Max. array short-circuit current: 60 A (48 A @ STC)
• Max PV array rating: 5250 W
• Max. charge current: 60 A (for all battery voltages except 60 V)
• Max. and min. wire size in conduit: #6 AWG to #14 AWG (10 to 2.5 mm²)
• Max. output power: 3500 W
• Charger regulation method: Three-stage (bulk, absorption, float) plus manual equalization Two-stage (bulk, absorption) plus manual equalization
• Supported battery types Flooded, GEL, AGM, Custom

Efficiency

• Schneider Electric Conext Max. power conversion efficiency: 93% (nominal 12 V), 96% (nominal 24 V), 97% (nominal 36 V), 98% (nominal 48 V), 99% (nominal 60 V)

General specifications

• Power consumption, night time: 2.5 W
• Battery temperature sensor: Included
• Auxiliary output: 5 – 13 V, up to 200 mA
• Enclosure material: Indoor, ventilated, sheet metal chassis with 2.2 cm and 2.8 cm (7/8 in and 1 in) knockouts and aluminium heat-sink
• IP degree of protection: IP20
• Product weight: 4.8 kg (10.8 lb)
• Shipping weight: 8.0 kg (17.6 lb)
• Product dimensions (H x W x D): 36.8 x 14.6 x 13.8 cm (14.5 × 5.8 × 5.5 in)
• Shipping dimensions (H x W x D): 48.3 x 22.9 x 35 cm (19.0 × 9.0 × 9.8 in)
• Device mounting: Vertical wall mount
• Ambient air temperature for operation: -20 °C to 45 °C (-4 °F to 113 °F)
• Storage temperature range: -40 °C to 85 °C (-40 °F to 185 °F) full power, power derating above 45 °C
• Operating altitude: Sea level to 2000 m (6562 ft)
• System network and remote monitoring: Available

Still Have Questions? Give us a call today 1-877-242-2792